Pilot Training Flight Simulator’s official Seaplane Package description currently lists five amphibious aircraft: Cessna 172, Cessna 182, Cessna Caravan, Piper Cub, and DHC-6 Twin Otter. The description says they are found under the Amphibious category in the plane spawner. Check the official pass page and your live spawner before buying or planning a route.
Seaplane package lookup
These roles are practical suggestions, not a performance ranking. The official description verifies the package inventory, while exact handling and availability need a live test.
Find a seabase
Current community airport navigation documents Sea Haven, Waterloo, and Tavaro Seabase as dedicated amphibious locations. It also lists the Oil Rig as supporting amphibious aircraft and helicopters. Seabases are placed on the coasts of islands and are intended for water-capable aircraft; they do not serve normal airliners.
Choose a departure with open water, then identify the destination and an alternate before moving. Keep clear of docks, shorelines, bridges, and players. A runway-to-water route is easier to learn than starting with two cramped seabases because the runway departure provides a familiar first half.
Spawn the correct variant
Open the Amphibious category in the aircraft spawner. A standard Cessna 172 or Piper Cub from Light Aircraft is not automatically the water-capable version. Confirm the category and the model appearance before taxiing into water.
If the aircraft is locked, open the pass through the official experience or Roblox page. The current official description says the package grants access to five seaplanes and warns that gamepasses are not refundable. This guide does not freeze a price because Roblox sale details can change.
Water takeoff
Start the engine and add throttle gradually while pointed into open water. Leave more room than you think you need; turning sharply near a dock can trap a wing or float. Build speed in a straight line and use gentle pitch as the aircraft becomes ready to lift.
Avoid full control input. Water movement can make alignment feel slow, followed by a sudden swing. If the route ahead is blocked, reduce power and reposition rather than forcing the takeoff between objects.
Once airborne, climb before turning back over the seabase. Use the flight kit speed, altitude, and fuel readings and follow the same fixed-wing control pattern described in the takeoff guide.
Water landing
Choose a long stretch of clear water aligned away from shore. Approach early, slow into the model’s live landing-speed range, and keep wings level. Flare gently and let the floats or hull meet the surface without a steep descent.
After contact, reduce power and keep straight until slow. Water landing areas do not have runway centerlines or PAPI lights, so visual planning matters. If boats, aircraft, docks, or terrain block the path, go around and choose a new direction.
For a runway landing, treat the amphibious model like its fixed-wing role while checking the live gear state and Controls panel. Do not assume the equipment behaves exactly like the standard landplane variant.
Plan an island route
Waterloo is documented near Greater Rockford, Sea Haven near Perth, and Tavaro Seabase on Grindavik. Use the map guide to understand the island layout and the airport codes page for nearby runway alternatives. A sensible first route keeps a large airport within reach if the water destination is crowded.
Carry enough fuel, avoid Cruise Mode until stable and clear of obstacles, and check the destination before committing to a low approach. Seaplanes are good exploration tools, but the package does not remove normal flight planning.
What needs in-game testing
Exact water handling, takeoff distance, landing speed, gear behavior, airport availability, and current pass price must be verified in the live version. Community maps and seabase lists can lag after a remodel. The official pass inventory is the reliable source for the five included aircraft, checked September 22, 2026.